Low maintenance, weather-ready, and built to last decades. Hundreds of styles and colors to match your home's character.
Call for a Free Quote: +1-844-782-0929
Our crews install vinyl every week. That repetition builds genuine skill -- tighter joints, proper expansion gaps, and correct fastener technique that holds up season after season.
We bring samples to your property in Franktown so you can evaluate colors and textures against your actual roofline, trim, and landscaping before committing to an order.
Proper installation technique matters as much as product quality. We cut on score, nail in the center of slots, leave correct overlap, and seat J-channels and trim pieces so the system performs as designed.
Every vinyl siding project we complete in Franktown includes a written workmanship warranty alongside the manufacturer product warranty. You have coverage on both the materials and the installation labor.
From the initial substrate check through final trim detail, our installation crews handle every step. Clean, precise, and built to last through Franktown, CO's seasonal shifts.
We remove and properly dispose of existing siding, inspect the substrate for moisture or rot before covering it, and install new vinyl to manufacturer specs. Your home gets a fresh exterior backed by a full warranty.
Insulated vinyl siding incorporates a foam backing that improves thermal performance, adds panel rigidity, and provides a quieter exterior. A strong choice for Franktown, CO homes with high energy costs or thin wall assemblies.
Vinyl shake panels replicate the texture of hand-split cedar without maintenance demands. Used on gable ends, accent walls, and full facades, they add dimensional character to any home style.
Vertical installation requires different technique than horizontal lap. Expansion allowances run differently, and water management at the top edge demands precise flashing detail. Our crews have the experience to get it right.
Coordinated vinyl soffit and fascia complete the siding system and protect your roofline from moisture intrusion. We match profiles and colors to your siding for a finished, continuous look on every elevation.
Standard grade vinyl (typically .040" thick) is adequate for mild conditions and budget-conscious projects. Premium grades (.044" and above) hold shape better in temperature extremes common to Franktown, CO and resist denting from impact more effectively. We specify grade based on your home's exposure, not upsell pressure.
Thickness is measured in thousandths of an inch (mils or gauge). Thicker panels feel more solid, flex less in wind, and generally carry longer fade warranties. We provide thickness comparisons from the brands we carry so you can make an informed choice.
Insulated vinyl costs more upfront but reduces heating and cooling load, eliminates panel flex noise, and adds perceived quality. For Franktown homeowners dealing with significant temperature swings, the energy offset can narrow the price gap over a decade of ownership.
We stock impact-rated options and recommend them for exposed elevations. Manufacturer documentation on impact ratings is available on request -- you should know what you are installing before work begins.
We assess your home, discuss grade and style options, and deliver a written estimate with material and labor broken out. No vague totals, no pressure.
We coordinate delivery so material arrives at your property shortly before installation begins, reducing the window during which it is exposed to weather or handling damage at the site.
Our crew prepares the substrate, installs starter strips and corner posts to spec, and works systematically across each elevation. Every panel goes on at the correct tension, with proper overlap and expansion allowances.
Your sign-off comes only when you are satisfied. We resolve any punch-list items before leaving the site and leave you with a clear record of what was installed and what is covered.
Vinyl siding is manufactured from polyvinyl chloride (PVC) resin compounded with stabilizers, pigments, and impact modifiers. The resulting panels are extruded at consistent thickness, then embossed with surface textures that mimic wood grain, cedar shake, or smooth lap board. Because the color runs through the full thickness of the panel rather than sitting as a surface coat, minor scratches and scuffs do not expose an underlying substrate. This characteristic distinguishes vinyl from painted wood or fiber cement and contributes directly to its maintenance advantage.
In Franktown, CO, where temperature swings between seasons can be substantial, vinyl's expansion and contraction behavior is the most important installation variable. PVC expands and contracts at a rate significantly higher than wood. A ten-foot panel can change length by a meaningful fraction of an inch between a summer afternoon and a cold winter morning. Professional installers account for this by nailing through the center of elongated slots in the nailing hem, allowing the panel to slide freely rather than binding. When panels are face-nailed, driven tight, or installed without adequate overlap, the system buckles in summer heat or gaps in winter cold. This is the most common source of vinyl siding failure in Franktown, and it is entirely avoidable with correct installation technique.
Vinyl siding grades are measured primarily by panel thickness, expressed in thousandths of an inch. Products at the lower end of the market measure around .040 inches. Premium lines reach .044 to .050 inches or more. Thicker panels carry greater impact resistance, flex less in high winds, and maintain a flatter profile over long spans between studs. They also tend to carry more favorable fade warranties from manufacturers, because the pigment loading in premium grades is formulated for longer color stability under UV exposure. For most standard residential applications in Franktown, a mid-range to premium thickness is a reasonable specification. Budget-grade panels are appropriate for low-exposure applications like enclosed porches or garage elevations with minimal sun and wind exposure.
Insulated vinyl siding takes the standard product and bonds a layer of contoured XPS or EPS foam to the back face. This foam layer does several things simultaneously. It increases the thermal resistance of the wall assembly modestly but consistently, typically adding between R-2 and R-4 to the exterior envelope depending on foam thickness. It eliminates the hollow-drum sound that standard vinyl produces when rain or hail strikes it. It also adds panel stiffness, which reduces oil-canning (the slight waviness visible on flat panels in raking light) and provides a more solid feel when the panel is pushed or struck. For older homes in Franktown, CO with thin wall assemblies or insufficient insulation, the thermal contribution of insulated vinyl is a meaningful bonus on top of a new exterior appearance.
Cleaning vinyl siding requires very little effort compared to painted wood. Most surface dirt and mildew washes off with a garden hose and a soft brush. For more stubborn mildew, a diluted solution of white vinegar and water or a vinyl-specific cleaning product removes organic growth without damaging the panel surface. Pressure washers used at low pressure and kept away from panel joints are effective. High-pressure streams directed under the panel laps force water behind the siding and create exactly the moisture infiltration the system is designed to prevent. Cleaning vinyl two to three times per year in Franktown, CO keeps it looking fresh without significant time investment, and no repainting is ever required.
Properly installed vinyl in Franktown, Franktown, CO holds up for a long time when the installation fundamentals are correct. Warranty documents from reputable manufacturers cover decades of product performance. What they do not cover is installation error, which is why workmanship warranty from your contractor matters as much as the product warranty itself. When you invest in a new exterior, the contractor's commitment to their own work is the most meaningful assurance of long-term performance. We back ours in writing.
"I was nervous about committing to a color without seeing it on the house. SOS Roofing and Siding brought samples out, held them up against different elevations, and we made a confident decision. The finished result looks exactly as we imagined."
"The crew upgraded us to insulated vinyl after showing us the cost difference and what it would do for our north-facing wall. Best decision we made on the whole project."
"Replacing our failing vinyl revealed substrate damage we didn't know existed. SOS Roofing and Siding showed us photos, explained the repair, and handled it as part of the project without a runaround. Excellent communication throughout."
"Crew showed up on time every day, cleaned up every evening, and finished ahead of the original schedule. The soffit and fascia match the siding perfectly. The whole exterior transformation has our neighbors asking who we used."
